----------------------------------------------------------------------------------
@MSGID: 3:633/10 b76ef54e
@REPLY: 3:633/10 944a7848
@PID: PyGate 1.5.19
@TID: PyGate/Linux 1.5.19
@NOTE: Mozilla Thunderbird
@CHRS: ASCII 1
@TZUTC: 0100
@REPLYADDR: daniel@me.invalid
@REPLYTO: 3:633/10 UUCP
@RFC-Message-ID: <11b2trl$1aci2$1@dont-email.me>
On 18/10/2026 12:44, Chris Green wrote:
> Does anyone have recommendations/experience of NVMe to USB3 adapters for
> use with a Pi4?
NOT a direct answer to your question, but ...
I have one of these cases:
https://thepihut.com/products/argon-one-m-2-raspberry-pi-4-case
It holds a Pi4, passively cools it (quite well) and takes an M.2 SATA
(not NVMe) SSD. There`s a USB3 "bridge" (for want of a better word) that
connects one of the Pi`s USB3 ports to a USB3 port on the case.
I`ve found that when it works it works quite well, but sometimes it
won`t boot. I think the USB3-SATA adaptor isn`t ready quickly enough and
the Pi doesn`t see the SSD.
I have a regime that involves booting the Pi4 from an SD card and then
*restarting* at which point it finds the SSD quite happily and will then
run quite stable for as long as I`ve been bothered to test it.
Apart from the booting issue I think this is quite a good solution for
running a Pi4 with better storage than an SD card.
This won`t let you use the NVMe SSD you already have, of course. With
SSD prices being what they are at the moment I can understand your
wanting to use what you have.
--
Cheers,
Daniel.
--- PyGate Linux v1.5.19
* Origin: Dragon`s Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 19/10 50/109 153/757 218/840 840 220/70 221/1 6 360 226/17 100
SEEN-BY: 229/426 240/1120 267/800 301/1 113 812 310/31 335/364 341/66 463/68
SEEN-BY: 550/278 633/10 280 281 416 418 420 422 509 2744 712/848 770/1 3 100
SEEN-BY: 770/340 772/210 220 230 5001/100 5019/40 5020/715 848 1042 4441 12000
SEEN-BY: 5023/24 5030/49 722 1081 1474 5051/44 5061/133 5075/128
@PATH: 633/10 280 770/1 218/840 221/6 301/1 5020/1042 4441 715