- RBERRYPI ---------------- < Пред. | След. > -- < @ > -- < Сообщ. > -- < Эхи > --
 Nп/п : 29 из 100
 От   : mm0fmf                              3:633/10          19 окт 26 10:16:25
 К    : All                                                   19 окт 26 02:35:01
 Тема : Re: NVME to USB3 adapters for Pi4
----------------------------------------------------------------------------------
                                                                                 
@MSGID: 3:633/10 04e48d74
@REPLY: 3:633/10 9ef2fb0b
@PID: PyGate 1.5.19
@TID: PyGate/Linux 1.5.19
@NOTE: Mozilla Thunderbird
@CHRS: CP1252 2
@TZUTC: 0100
@REPLYADDR: none@invalid.com
@REPLYTO: 3:633/10 UUCP
@RFC-Message-ID: <11b4n5a$1tqfg$1@dont-email.me>
On 19/10/2026 04:54, Lawrence D?Oliveiro wrote:
> On Sun, 18 Oct 2026 20:37:02 +0100, mm0fmf wrote:
> 
>> On 3 different AMD64 machines running Debian 13 I had no end of
>> unreliability issues until I disabled UASP (USB Attached SCSI
>> Protocol) and forced them to use the older and slower USB Mass
>> Storage Protocol. This was with a line in /etc/modprobe.d/uas.conf.
>> After that they both work splendidly but a little slower.
>>
>> The same drive worked perfectly with Win11 running on an identical
>> laptop to my Linux laptop so this appears to be a
>> Linux-Debian/JMicron driver / firmware issue.
> 
> Curious to know, was Windows using UASP? Did the drive end up working
> faster on Windows than on Linux?

An interesting question. I was sure it was UASP on Win11.

I dug out and fired up the Win11 laptop (now I need to shower in 
bleach!) This is Win11 Pro 25H2, Dell 7490 laptop i7-8650U / 16GB. The 
Linux machine is identical hardware with Debian 13 updated yesterday. 
Both have USB Gen 3.1 Gen .

The NVMe USB disk is ext4 and I can`t access this on Windows but I have 
another USB3 to mSATA disk with JMicron controller. This is only 5Gbps 
but has a 256GB FAT32 formatted disk and being mSATA is not as fast.

On Win11, DeviceManager says it`s using UASP and on Linux, dmesg states 
the VID/PID matched the quirks file and so it`s using USB Mass Storage.

I copied a photo backup folder, 49GB, 11000 files from the disk back to 
itself on both machines.

Win11 average transfer rate was 95MB/sec
Linux average transfer rate was 80MB/sec

For laughs, I tried the same experiment on an Debian 13 i7-12700 machine 
with USB 3.2Gen2x2 and the mSATA drive.  It too was USB Mass Storage not 
UASP and it averaged 97MB/sec. It`s a noticeably fast desktop.

That slow down between UASP and USB MAssStor fits with my experience 
with many years as a USB designer.

The mSATA adapter was a massive Ь4.50 from eBay and the mSATA drive came 
out of a 2015 vintage laptop that was broken for parts.




--- PyGate Linux v1.5.19
 * Origin: Dragon`s Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 19/10 50/109 153/757 218/840 840 220/70 221/1 6 360 226/17 100
SEEN-BY: 229/426 240/1120 267/800 301/1 113 812 310/31 335/364 341/66 463/68
SEEN-BY: 550/278 633/10 280 281 416 418 420 422 509 2744 712/848 770/1 3 100
SEEN-BY: 770/340 772/210 220 230 5001/100 5019/40 5020/715 848 1042 4441 12000
SEEN-BY: 5023/24 5030/49 722 1081 1474 5051/44 5061/133 5075/128
@PATH: 633/10 280 770/1 218/840 221/6 301/1 5020/1042 4441 715



   GoldED+ VK   │                                                 │   09:55:30    
                                                                                
В этой области больше нет сообщений.

Остаться здесь
Перейти к списку сообщений
Перейти к списку эх