----------------------------------------------------------------------------------
@MSGID: 3:633/10 9ed4c4cc
@REPLY: 3:633/10 29820418
@PID: PyGate 1.5.19
@TID: PyGate/Linux 1.5.19
@NOTE: tin/2.6.4-20241224 ("Helmsdale") (FreeBSD/14.4-STABLE (arm64))
@CHRS: ASCII 1
@TZUTC: 1100
@REPLYADDR: bp@www.zefox.net
@REPLYTO: 3:633/10 UUCP
@RFC-Message-ID: <11bg4ia$209l1$1@dont-email.me>
Marco Moock <
mm@dorfdsl.de> wrote:
> Am 23.10.26 um 12:53 schrieb Marckus:
>> Am 21.10.2026 um 20:36 schrieb Marco Moock:
>>> Hello!
>>>
>>> I got another Pi 3+ - used.
>>> I booted FreeBSD.
>>>
>>> I edited
>>> /boot/efi/config.txt
>>>
>>> [all]
>>> arm_64bit=1
>>> dtparam=audio=on,i2c_arm=on,spi=on
>>> dtoverlay=mmc
>>> dtoverlay=disable-bt
>>> device_tree_address=0x4000
>>> kernel=u-boot.bin
>>>
>>
>> ???
>>> [pi4]
>> Will this work for a Pi 3B?
>
> Good question, I do not know.
> The file is from FreeBSD, they only offer one RPi image for both models.
>
> Is there a knows way for RPi3?
>
> Which part does read that and change the PROM on the Pi?
> Is that something from the OS or from the Pi`s onboard firmware?
There`s a "bootcode.bin-only" boot method that works for some older
Pi3B version. IIRC it worked for one of mine, but not another.
There`s some information at
https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#usb-boot-modes
Good luck, please post what your discover!
bob prohaska
--- PyGate Linux v1.5.19
* Origin: Dragon`s Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 19/10 50/109 153/757 218/840 840 220/70 221/1 6 360 226/17 100
SEEN-BY: 229/426 240/1120 267/800 301/1 113 812 310/31 335/364 341/66 463/68
SEEN-BY: 550/278 633/10 280 281 416 418 420 422 509 2744 712/848 770/1 3 100
SEEN-BY: 770/340 772/210 220 230 5001/100 5020/715 848 1042 4441 12000 5023/24
SEEN-BY: 5030/49 722 1081 1474 5051/44 5061/133 5075/128
@PATH: 633/10 280 770/1 218/840 221/6 301/1 5020/1042 4441 715