----------------------------------------------------------------------------------
@MSGID: 3:633/10 0652976d
@REPLY: 3:633/10 aaed7578
@PID: PyGate 1.5.19
@TID: PyGate/Linux 1.5.19
@NOTE: tin/2.6.4-20241224 ("Helmsdale") (FreeBSD/14.4-STABLE (arm64))
@CHRS: ASCII 1
@TZUTC: 1100
@REPLYADDR: bp@www.zefox.net
@REPLYTO: 3:633/10 UUCP
@RFC-Message-ID: <11cafu8$31sh6$1@dont-email.me>
Marco Moock <
mm@dorfdsl.de> wrote:
> Am 25.10.26 um 17:24 schrieb
bp@www.zefox.net:
>> That`s a critical first step. If RasPiOS won`t boot from a USB device
>> there`s little hope of making FreeBSD work. My understanding is that
>> later Pi3`s do boot from USB "out of the box", certainly my Pi4 and 5
>> did.
>
> Raspi OS boots fine from USB on the Pi 3B. The issue here is clearly
> FreeBSD/UBoot.
> On the Pi 4, it does not, it seems it does not detect the USB at all, as
> no FreeBSD bootloader is being started.
Pi4 ? Now I`m getting confused. My Pi4 boots FreeBSD from a mechanical
hard disk without problems.....
In any case, do you see anything on the serial console?
hth,
bob prohaska
--- PyGate Linux v1.5.19
* Origin: Dragon`s Lair, PyGate NNTP<>Fido Gate (3:633/10)
SEEN-BY: 19/10 50/109 153/757 218/840 840 220/70 221/1 6 360 226/17 100
SEEN-BY: 229/426 240/1120 267/800 301/1 113 812 310/31 335/364 341/66 463/68
SEEN-BY: 550/278 633/10 280 281 416 418 420 422 509 2744 712/848 770/1 3 100
SEEN-BY: 770/340 772/210 220 230 5001/100 5005/49 5020/715 848 1042 4441 12000
SEEN-BY: 5023/24 5030/49 722 1081 1474 5051/44 5061/133 5064/56 5075/128
@PATH: 633/10 280 770/1 218/840 221/6 301/1 5020/1042 4441 715